Product

Manual Hydraulic Remote Valve Operating System
HYDECK is named for Manual Hydraulic Remote Valve Operating System. This system is primarily composed of two parts, the transmitter which generates the power by pumping the hydraulic oil and the actuator which is fitted onto the valve body and receives the hydraulic oil from the transmitter to actuate the valve. The transmitter and actuator are connected by a pair of small tubing which are used as a means to transfer the hydraulic oils between the two parts.

FEATURES

  • Easy and cost-effective installation.
  • Easier operation with higher efficiency and reliability of the performance.
  • The transmitter can be installed in any position.
  • High reliability without the necessity of special maintenance.
  • Emergency local manual handle can be mounted on the receiver valve.
HYDRAULIC ACTUATOR

STANDARD SPECIFICATION

Operating Fluid Hydraulic Oil (ISO VG 22~32)
Actuator Type Rotary Rack & Pinion, Scotch & Yoke
Linear Linear Cylinder
Actuator Action Double Acting, Single Acting
Temperature Range -29 ~ 70˚C (-20 ~128˚F)
Accessory (Option) Manual Handle, Lamp Box, Limit Switch
TRANSMITTER

STANDARD SPECIFICATION

Operating Fluid Hydraulic Oil (ISO VG 22~32)
Discharge Capacity 12cc/rev, 24cc/rev, 48cc/rev, 67cc/rev
Relief Pressure Open : 110 kg/cm2
Close : 100 kg/cm2
Test Pressure 150 kg/cm2
Tank Volume 1.6 liter
Type Single Type, Multi Type